How to Build a Smok Pen
The Smok Pen is really a revolutionary vaporizing pen that allows for a write-to-write experience, whilst you are away from home. This is because of the unique design of the pen. It has two tanks, one smaller compared to the other, that house the e juice and charged batteries. When the user wants to write, he just places the pen into the smaller tank and places the ink in the chamber where it will be vaporized. He simply turns on the pen and writes as though he could be writing under a black mirror.
One of the biggest attributes of the Smok Pen is its ability to charge while it is on your desk. For the reason that the coils on the Smok Pen are designed in a way to keep the e juice from dripping onto the table or somewhere else. This is due to the 0.3-ohm coil that’s placed inside the Smok Pen. The 0.3-ohm coil ensures that even the slightest of air currents won’t affect the writing process. It is because the electronic circuitry has protection built in so that it will not be suffering from extremely low voltage electric currents.
The Smok Pen could be charged internally with a charger or via the USB connection that is included with it. Because the electronic circuitry includes a safety barrier built in, therefore there is absolutely no risk involved when charging the device through the computer. The Smok Pen includes a charging capacity of sixteen 50 mah batteries, which is ideal for all pens that use one or two batteries.
In order to keep the Smok Pen doing work for an extended time frame it is important that you don’t overcharge the battery. Overcharging the battery will certainly reduce the voltage that is available and may eventually bring about these devices malfunctioning. Overcharging the Smok Pen could also affect the vaporizing process. If you feel that your battery isn’t getting the vapor it will, remove the pen from the energy source and let it cool off for some minutes.
The fire button on the Smok Pen is located at the bottom right corner of these devices. The fire button comes with an orange light, which indicates that it is on. It is possible to press this button to activate the electronic heating element that will allow you to vaporize the oil. When you have done so you can remove the coil from the holder and place it in to the holder and place the Smok Pen into the airflow chamber, that may cause the heating element to start out heating up and burning away the wick.
When the coil is taken off the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are placed inside the holder and they get heated from the airflow. Once they get hot they start to turn blue, that is the indication that it’s ready for the pen’s battery. Make sure that you place your sub-ohm in to the chamber before you push the fire button. If you don’t put the coil in to the airflow chamber then the oil will leak and cause the leaking of e-juice.
Before you put the battery in to the pen, you must make sure that you have disconnected all of the leads. Then you need to take out the Smok Pen’s cap and locate the leak or drip tip. You must clean this with a small cotton bud, so that you could get rid of the leak. Then reattach the cap back to the Smok Pen and you are prepared to place the battery in to the pen.
The final area of the vapinger.com construction process may be the adapter plate, which fits in to the Smok Vaporizer’s USB port. This plate lets you charge your e-juice during your computer, as long as you have an adapter for USB connection. I like this part as it allows me to charge my entire kit at once without fretting about running out of power or constantly running out of e-juice.